Table of Contents
Advertisement
W
ITH REMOTE CONTROL
(only when SECURITY in the TV SETUP menu is set to LOW).
To activate TV Setup menu.
Select a channel number.
Key in 3 1 9 7 5 3.
Press H .
The above sequence should be done within 20 seconds and TV SETUP menu will appear.
W
ITH REMOTE CONTROL
(only in TV Commercial mode)
Part A: To check TV's mode.
Set the remote control selectable switch to SETUP.
Press RECALL key and the TV Status menu will appear.
Check line 10 of the menu to see if the TV is in the Commercial or Consumer
mode.
If the TV is in the Commercial mode, then proceed to Part B to activate the TV
Setup menu. Otherwise, go to Part C to change the TV mode to Commercial.
Part B: To activate TV Setup menu.
Press the RECALL key to clear the menu.
Press the M key to activate the TV Setup menu.
Part C: To select Commercial mode, if the TV is in Consumer mode (or to select
Consumer mode, if the TV is in Commercial mode).
Press the RECALL key to clear the menu.
Press 0 2 4 9 9 5.
Press M key and the TV Mode menu appears.
Press +or -key to select Commercial mode.
Highlight STORE and press theÉkey to store the change. TV will then go to
standby mode.
Press any numeric key to switch on the TV again and follow the procedure in
Part B, step 2 to activate the TV Setup menu.
p8-12_081205
A
TV S
CTIVATING
RC2886/RC2887
RC2573GR
8
8
M
ETUP
ENU
12/8/05, 5:08 PM
Advertisement
Table of Contents
