HP 8100 User Manual page 51

Chapter 1 HP Digital Copy
Menu Tabs (continued)
2-sided/N-up tab
HP Digital Copy Control Panel
This tab has four controls for setting up the options and a
preview image that graphically illustrates the current
settings.
!
2-sided Copying - Shows the currently selected 2-sided
mode. Choose the two-sided mode you need. The
preview image will update to display your choice.
!
Flip Pages Up - This setting is active if the you choose to
copy onto both sides of the output paper. By default, the
pages of the two-sided binding are flipped to the left, like
a book, when viewed from the backside of the job. When
this setting is checked, the pages are bound, appearing
flipped up when viewed from the backside of the job. The
preview image will update to display your choice.
!
N-up Copying - Shows the currently selected number of
input pages to be printed on each output page. Choose
the number of input pages needed to print on each output
page. The preview image will update to display your
choice.
!
Print Page Borders - This setting is active when you select
two or more pages for each sheet. When checked, page
borders will print around each page image on the output
page. The preview image will update to display your
choice.
51