Table of Contents
Advertisement
VIKING COMPONENTS 33.6K/56K PC CARD USER'S GUIDE
3 Installation
This chapter contains instructions on installing your Viking PC Card fax/modem.
Hardware Installation
The hardware installation is the same for all operating systems unless otherwise
noticed.
Note: When installing a fax/modem into a Mac OS system, make sure that exten-
sions are on.
Apple PowerBook 520 & 540 Note: Prior to installing the Viking Components PC
Card Fax/Modem, you must purchase and install an Apple PowerBook PC Card
Drive Adapter - Apple Part Number M2995LL/B. This adapter is available from
Apple and contains the necessary software enabling access to the PCMCIA card
slot. Follow the instructions provided with the package from Apple and then pro-
ceed with the following steps.
Apple Newton Note: The Apple Newton requires a different installation proce-
dure. Please proceed to page 6, on "Hardware Installation for the Apple Newton."
1. With your computer on, insert the
Viking fax/modem card into the
desired (PCMCIA) PC Card slot
(either the upper or lower). Insert
the corresponding end of the sup-
plied cable into the your wall phone
jack and the other end of the cable
into the Viking modem. Be sure that
the word "TOP" on the connector
that inserts into the modem is fac-
ing up.
5
Chapter 3
Advertisement
Table of Contents
