Gemini GEM-DXK2 Operating Manual page 12

T U R N I N G O F F T H E AL AR M ( D I S AR M I N G ) W H E N R E T U R N I N G
Ambush
(Optional) Your Ambush Code Type is: TYPE 1 (Prefix) TYPE 2 (Unique) My Ambush Code is ___________________
U.
If an intruder forces you to disarm your system, enter your Ambush Code and press There are two types of Ambush Codes: (1) A
2-digit code (prefix) entered just prior to your normal User Code and (2) A separate and unique User Code.
U.
Example Type 1 (Prefix): If your User Code is 1234 and your Ambush Code is 99, press
991234
U
Example Type 2 (Unique): If your User Code is 1234 and your Ambush Code is 8899, press
8899
Using your Ambush Code will send a silent alarm to the central station. The red ARMED light will go out and the window will display
"SYSTEM READY" as if the system were normally disarmed. There will be no indication that a silent alarm has been sent.
Day Zone (Day Zone(s) programmed? YES NO)
A Day Zone is used to monitor a secured exit door, window foil, etc. A problem on this type of burglary zone will cause a "DAY ZN" dis-
play followed by "ZONEXX" (xx represents the zone number) and a pulsing keypad sounder while disarmed. To silence the sounder,
press (or arm and disarm, if so programmed). Correct the problem to reset the Day Zone.
C
24-Hour Zone ? YES NO)
(24-Hour Zone(s) programmed
This zone is always armed, even if the system is disarmed. If there is no audible output (bell, siren, etc.) programmed for this zone, it
will behave as a regular Burglary Zone, however an alarm will be reported to the central station and recorded in the Alarm Event Log. If
an audible output is programmed, a 24-Hour Zone will behave as an armed Burglary Zone. If the system is subsequently armed with a
24-Hour Zone in trouble, the keypad sounder will come on momentarily to indicate that there is a problem.
12