Replacing A Hard Drive; To Remove A Hard Drive - HP 800 Installation Manual

Replacing a Hard Drive

Before replacing the hard drive, check to make sure that you have the following
three items:

To remove a hard drive

You normally don't remove drive C, the main internal disk (also called the "hard-
disk drive"). The two main reasons to replace drive C are for upgrade and for repair.
C A U T I O N Back up your files before replacing the drive.
Take precautions against damage from static electricity. Gather all the parts
you need so you can complete the installation in one sitting. Don't remove the
drive from its packaging until you're ready to insert it.
When you remove the drive from its packaging, hold it only by its edges.
Turn off the computer, unplug the ac adapter, and remove the battery before
removing the hard drive. Otherwise, the OmniBook or the hard drive may be
damaged.
Hard disk drive.
Torx T6 screwdriver for opening your OmniBook computer.
This HP OmniBook Installation Guide.
Using OmniBook Disk Drives
Replacing a Hard Drive
1-11