HP 800 Installation Manual page 16

C A U T I O N
Using OmniBook Disk Drives
Replacing a Hard Drive
Do not push down on the hard drive . If the hard drive connectors do not
engage the computer connectors, pull the hard drive back out and try again.
4. If the ribbon cables on the keyboard are no longer tucked into the case, then
push them back into the recessed openings with a paper clip, as shown below.
5. Insert the keyboard by engaging the four front tabs on the keyboard into the
four slots in the computer case, pressing down on the keyboard as you insert
1-16
Tuck ribbon cable
down as shown.