ZyXEL Communications G-162 Quick Start Manual page 10

The AP and wireless client(s) MUST use the same Setup
key.
6.1 AP
You can enable OTIST using the Reset button or the web configurator. If you use
the Reset button, the default (01234567) or previous saved (through the web
configurator) Setup key is used to encrypt the settings that you want to transfer.
Hold in the Reset button for one or two seconds.
If you hold in the Reset button too long, the device will
reset to the factory defaults!
In the web configurator, go to the Wireless LAN main screen and then select
OTIST. To change the Setup key, enter zero to eight printable characters. To have
OTIST automatically generate a WPA-PSK key, select the Yes check box. If you
manually configured a WEP key or a WPA-PSK key and you also selected this
check box, then the key you manually configured is used.
ENGLISH
8