Transmission; Wheel Drive System; Tires; Deck - Exmark Turf Tracer HP Operator's Manual

2.7 TRANSMISSION:

Twin Hydrostatic Drive
2.7.1 Two Hydro Gear BDP-10L series variable displacement efficiency pumps
independently coupled to two high effeciency Parker/Ross wheel drive motors.
2.7.2 Hydraulic Filter is replaceable cartridge type.
P/N 513211: 10 microns, 18 psi bypass (Summer use above 32° F)
P/N 523541: 40 microns, 18 psi bypass (Winter use below 32° F)
2.7.3 Speed Range:

2.8 WHEEL DRIVE SYSTEM:

Drive wheels are direct coupled to Parker/Ross wheel drive motors with 1.0"
(25.4 mm) tapered shaft.

2.9 TIRES

Size .................16 x 6.50-8...........................9 x 3.50-4
Quantity...................... 2.........................................2
Tread ......... Turf Saver/Turf Master.................. Smooth
Ply Rating................... 4.........................................4
Pressure........ 14 psi (97 kPa)................. 22 psi (152 kPa)

2.10 DECK

2.10.1 Cutting Width:
Model 36 in. ........................................ 35.25 in. (89.5 cm)
Model 48 in. ........................................ 47.25 in. (120.0 cm)
Model 52 in. ........................................ 52.00 in. (132.1 cm)
2.10.2 Discharge: Right Side
2.10.3 Blade Size:
Model 36 in. .............. 18.00 in. (45.7 cm) ..............Qty. 2
Model 48 in. .............. 16.25 in. (41.3 cm) ..............Qty. 3
Model 52 in. .............. 18.00 in. (45.7 cm) ..............Qty. 3
2.10.4 Type of Drive: Manual engagement of belt with over-center lock. Belt tension
is adjustable via turnbuckle.
2.10.5 Deck Mounting: Full floating deck is attached to out-front support frame,
removable for service.
2.10.6 Cutting Height: Adjusts in 1/2" (.63 cm) increments from 1.5" (3.8 cm) to 4 1/2"
(11.4 cm).
Forward 0 - 6.2 mph (10.0 km/h)
Reverse 0 - 2.2 mph (3.5 km/h)
Drive
- 10 -
Front Caster