Scan (Preview All Tracks); Repeat The Same Track; Random (Play All Tracks); Direct Track Access - Jensen CD510K Operation

CD510K

Scan (Preview all Tracks)

Press and hold the SCN button for
more than two seconds to play first
ten seconds of each track on current
CD. Press and hold the SCN button
>2 sec
for more than two seconds again to
stop intro and listen to track.

Repeat the Same Track

Press and hold the RPT button for
more than two seconds to continu-
ously repeat same track. RPT
appears in the display. Press and
>2 sec
hold the RPT button for more than
two seconds again to stop repeat.

Random (Play all Tracks)

Press and hold the RDM button for
more than two seconds to play all
tracks on CD in random order one
time. Press and hold the RDM button
>2 sec
for more than two seconds again to
stop random play.

Direct Track Access

While a CD is playing or paused, press a
preset button for less than two seconds to
select the corresponding track number (1–10).
<2 sec

Program CD Tracks

Use Program function to select up to
24 CD tracks to play in any order.
Program works by allowing you to
select a track number for each spot in
the playing sequence. A CD must be
inserted to use Program.
1
PWR
or
2. Press MEM/CLR to enter
2
track number into
memory. Display shows
next track number in
sequence. Continue (up
to 24 times) for all desired
3
tracks.
3. Press PGM to play CD in
programmed order.
Note: Direct access of tracks or discs cannot
be performed while in Program CD function.
To clear memory, press and hold
MEM/CLR in PGM mode while
CD is playing.
Note:
• Do not expose CD player to extremely
high or low temperatures.
• Do not drive with ejected CD in the slot.
®
1. Press Tuning Ring
up or down to
choose track
number.
9