Usb Cloning Procedure; Learning / Teaching A Master Tv Setup Using A Usb Memory Device - LG 22LG3DDH Setup Manual

USB Cloning Procedure

Learning / Teaching a Master TV Setup using a USB Memory Device

USB Cloning Notes
Read the IMPORTANT CLONING INFORMATION on page 27 before beginning any cloning procedures.
•
You may edit a filename as part of the Learning procedure; however, a file with edited contents will not
•
be recognized.
It is not possible to clone a Master TV's clock using a USB memory device. Either set a Target TV's
•
clock manually or use the Auto Clock setting in the TV setup menus.
Learn Setup from Master TV
1. Ensure the Master TV is set up completely.
2. Plug the USB memory device into the USB IN port on the Master
TV.
3. Press MENU on the Installer Remote to display the TV setup
menus, use the arrow navigation keys to select/highlight the
Option menu icon, and then press the number "7" key a total of
seven times to display the USB Download Menu.
4. To gain access to the "Learn From TV" option in the USB Down-
load Menu, key in the password used to enter the Installer Menu
(Example: Press 9-8-7-6).
5. Use the Up/Down arrow keys to select Learn From TV, and then
press OK (Enter).
6. To differentiate this .tll file from others, you can use the Up/Down
arrow keys to change the last five digits of the filename. Press
OK (Enter) when you are ready to initiate Learning.
Learning status will be shown on the progress bar. When the
Learning process is complete, the USB Download menu will reap-
pear on screen.
7. When Learning is done, remove the USB memory device from the
Master TV.
28
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Learn From TV
Exit
Learn From TV
Select the file name and press OK to start
xxLD6DDH-UA00001.TLL
Previous
!
Learn From TV
UPDATING...
25%
Do not unplug!
Enter
Enter
206-4190