How To Join Sets - LG 55WV70MD Owner's Manual

12
ASSEMBLING AND PREPARING

How to Join Sets

1
Join other sets using screws for fixing the VESA wall mount in the same way as above.
2
After joining the sets, use the tiling guide to adjust the gap between the sets.
3
Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.
NOTE
The load applied to each set should be supported by the wall mount plate or the wall using a VESA
y
wall mount (600 x 400).
The load applied to each set should be supported by the wall mount plate using a VESA wall mount.
y
(Each set must be firmly mounted to the wall mount plate or the wall.)
You may mount the set without using the tiling guide; this does not affect the performance of the
y
device.
Set 4 joined to the rest of the sets
(2 x 2 tiling)