Tiling Displays; How To Join Sets - LG 55LV75A Easy Setup Manual

10
ASSEMBLING AND PREPARING

Tiling Displays

How to Mount the Set
Example of 2 x 2 tiling
Screws for attaching the
VESA wall mount (M6)
CAUTION
When you connect Monitor sets for
 
multivision, you may find that the screen
color is not the same across all the Monitor
sets. If you want to adjust the screen color
manually, please refer to the Installation
Manual.
When you install multiple Monitor sets onto a
 
wall, attach the IR Receiver to all the sets, or
use an RS-232C cable to connect them and
then attach the IR Receiver to the first set.
600

How to Join Sets

1
Join other sets using screws for fixing the
VESA wall mount in the same way as above.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
2
After joining the sets, use the tiling guide to
adjust the gap between the sets.
3
Now the 2 x 2 tiling is complete. You can tile in
various combinations, such as 3 x 3.
NOTE
The load applied to each set should be
 
supported by the wall mount plate or the wall
using a VESA wall mount (600 x 400).
  The load applied to each set should be
supported by the wall mount plate using a
VESA wall mount. (Each set must be firmly
mounted to the wall mount plate or the wall.)
  You may mount the set without using
the tiling guide; this does not affect the
performance of the device.
Loosen the screws on the set to install the
 
tiling guides. (The screws are enclosed with
the other components in the box, including
the tiling guides.)