Start-Up And Use - Hotpoint UX 892 CX Instructions For Installation And Use Manual

Start-up and use

! The first time you use your appliance, heat the
GB
empty oven with its door closed at its maximum
temperature for at least two hours. Ensure that the
room is well ventilated before switching the oven off
and opening the oven door. The appliance may emit
a slightly unpleasant odour caused by protective
substances used during the manufacturing process
burning away.
! To make the setting process easier, keep the knob
in position: this will increase the scrolling speed of
the numbers on the display.
! Each setting will automatically be stored in the
appliance memory after 10 seconds.
! The touch controls cannot be activated if the user
is wearing gloves.
Control panel lock
! The control panel can be locked during the cooking
as well as once the cooking has finished.
To lock the oven controls, press and hold the
button for at least 2 seconds. A buzzer will sound
and the TEMPERATURE display shows the key
symbol "O—n". The
lock activation.
To deactivate the lock, press and hold the
button again for at least 2 seconds.
Setting the clock
! The clock can only be set when the oven is
switched off. If the oven is in standby mode,
pressing the
time setting. Press it again to set the time.
After connection to the power supply network or after
a blackout, the
for 10 seconds.
To set the clock:
1. Press button
2. Turn the TIMER knob towards "+ + + + + " and "- - - - - " to
adjust the hour value.
3. Once you have reached the correct hour value,
press the button.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
9
icon will light up to indicate
button once will display the current
button on the display will flash
.
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the
clock. If the icon flashes on the display, this
indicates that the clock has not been set correctly.
Setting the minute minder
! The minute minder may still be set whether the
oven is switched on or off. It does not switch the
oven on or off.
When the set time has elapsed, the timer emits a
buzzer that will automatically stop after 30 seconds
or when any active button on the control panel is
pressed.
To set the minute minder proceed as follows:
1. Press button .
2. Adjust the time as desired by turning the TIMER
knob towards "+ + + + + " and "- - - - - ".
3. Once you have reached the desired value, press
the button again.
The lit symbol will remind you that the minute
minder is on. The DISPLAY will show the countdown.
To cancel the minute minder, press the
and use the knob to set the time to 00:00. Press
button again.
The icon will switch off to indicate that the
minute minder has been disabled.
Starting the oven
1. Switch the control panel on by pressing the
button. The appliance buzzer sounds three times
(ascending) and all buttons light up in sequence.
2. Select the TOP/GRILL or MAIN oven by pressing the
TOP OVEN/ GRILL or MAIN OVEN
3. Select the desired cooking mode by turning the
SELECTOR knob. The display shows:
- the temperature associated with the mode, if
programming manually;
button
icon.