Start-Up And Use,6 - Hotpoint SJL 12 PTB Operating Instructions Manual

Table of Contents

Advertisement

Start-up and use
GB
them on the front part, and pull (2).
! The first time you use your appliance, heat the empty oven
with its door closed at its maximum temperature for at least
half an hour. Make sure that the room is well ventilated
before switching the oven off and opening the oven door.
The appliance may emit a slightly unpleasant odour caused
by protective substances used during the manufacturing
process burning away.
! To make the setting process easier, press and hold the
buttons to scroll through the numbers on the display rapidly.
! Each setting will automatically be stored in the appliance
memory after 10 seconds.
! The touch controls cannot be activated if the user is
wearing gloves.
! In order to optimise the cooking performance, when
starting the selected function, product settings will be
applied that could cause a delayed start of the fan and
heating elements.
Control panel lock
! The control panel can be locked while the oven is off, once
cooking has started or finished and during programming.
To lock the oven controls, press and hold the
for at least 2 seconds. A buzzer will sound and the
TEMPERATURE display shows the key symbol "O—n". The
icon will light up to indicate lock activation.
To deactivate the lock, press and hold the
for at least 2 seconds.
! When cleaning the appliance, the door lock may be closed
accidentally (there is an exposed spring). If this happens,
reopen it by turning the door lock upwards (see figure).
KO
Setting the clock
! The clock can only be set when the oven is switched off. If
the oven is in standby mode, pressing the
display the current time setting. Press it again to set the time.
After connection to the power supply network or after
a blackout, the
button and the digits on the TIME display
will flash for 10 seconds.
To set the clock:
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
6
WARNING! The oven is
provided with a stop system
to extract the racks and
prevent them from coming
out of the oven (1).
As shown in the drawing,
to extract them completely,
simply lift the racks, holding
button
button again
OK
button once will
1. Press the
button.
2. Adjust the hour figure using the
3. Once you have reached the correct hour value, press
the
button.
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the clock.
If the
icon flashes on the display, this indicates that the
clock has not been set correctly.
Setting the minute minder
! The minute minder may be set regardless of whether the
oven is switched on or off. It does not switch the oven on or off.
When the set time has elapsed, the timer emits a buzzer
that will automatically stop after 30 seconds or when any
active button on the control panel is pressed.
To adjust the timer proceed as follows:
1. Press button
.
2. Set the desired time using buttons
and
3. Once you have reached the desired value, press the
button again.
The lit
symbol will remind you that the minute minder is on.
To cancel the minute minder, press the
the
and
buttons to set the time to 00:00. Press button
again.
The
icon will switch off to indicate that the minute minder
has been disabled.
Starting the oven
1. Switch the control panel on by pressing the
The appliance buzzer sounds three times (ascending) and
all buttons light up in sequence.
2. Press the button corresponding to the desired cooking
mode. The TEMPERATURE display shows:
- the temperature associated with the mode, if programming
manually;
- "Auto", if programming is automatic.
The TIME display shows:
- the current time, if programming manually;
- the duration, if programming is automatic.
3. Press the
button to begin cooking.
4. The oven will begin its preheating phase, the preheating
indicators will light up as the temperature rises.
5. When the preheating process has finished, a buzzer sounds
and all the preheating indicator lights show that this stage has
been completed: the food can then be placed in the oven.
6. During cooking it is always possible to:
- change the temperature by pressing the
followed by the
and
- set the duration of a cooking mode (see Cooking Modes);
- press the
button to stop cooking. In this case the
appliance stores the temperature modified previously in its
memory (manual modes only);
- switch off the oven by pressing the
and
buttons.
and .
button and use
button.
button,
buttons (manual modes only);
button for 3 seconds.

Advertisement

Table of Contents
loading

Table of Contents