Table of Contents
Advertisement
2.
SPECIFICATIONS
Function
Input / Outputs
Setting Memory
Control
Weight
Dimensions
(W x D x H)
Power Source
3.
HOW DO I GET STARTED?
The fastest way to get started is to take your time and do everything right the first time. Taking 15
minutes to read this manual may save you a few hours later. You don't even have to read the whole
manual. At the beginning of each section, you'll find an overview of the section. If the section doesn't
apply to you, you don't have to spend your time reading it.
4.
UNPACKING AND CONTENTS
The items contained in your Kramer Controller package are listed below. Please save the original box
and packaging materials for possible future shipment of the Controller.
Controller
12 V DC power supply (wall transformer).
User Manual
DB-9 to DB-25 or DB-9 to DB-9 Serial Null-Modem Adapter
A Concise Directory of KRAMER Products
Optional Accessories
4.1
The following accessories, which are available from Kramer, can enhance implementation of your
Controller. For information regarding cables and additional accessories, contact your Kramer dealer.
VA-50P – to connect the VS-3000 to the mains supply. This is a six-outlet power supply
designed to operate Kramer products, which normally uses an external 12VDC power
transformer. This includes all units in the VM-50, VS-55, and VM-3 families, the Kramer
TOOLS and Pico TOOLS families, most of the TP series of twisted pair converters, and others.
By replacing up to six wall transformers, the VA-50P can save valuable space on power strips.
It can be installed in a rack using the model RK-50R kit, which holds two VA-50Ps and
requires two vertical spaces in a standard 19" rack. For non-rack applications, special brackets
are provided which allow multiple VA-50s to be stacked safely. The VA-50P is dependable,
rugged, and can also provide clean 12VDC power to non-Kramer devices up to a total supply
current of 600 milliamps, provided that the polarity is correct (positive = center pin).
VP-14 – adds more RS-232 ports. This unique product is designed to distribute RS-232
commands transmitted by a touch screen control system, personal computer, or other control
system. It allows the user to control up to three compatible devices when just one serial port or
RS-232 card is available. There are four 9-pin ports, any of which can receive incoming RS-
232. The incoming commands are then distributed to the remaining ports. An extensive set of
DIP switches allows the unit to be configured for use with crossed or straight (uncrossed)
cables. The VP-14 was designed specifically for use with Kramer switchers and routers, but
can be easily adapted for use with any other equipment, which uses RS-232 in null-modem
KRAMER ELECTRONICS, LTD.
Master Programmable Remote Controller
2 x RS-232 DB-9 in/out connectors
1 x RS-485 connector on detachable terminal blocks
9 pole, remote dry-contact connector on detachable terminal blocks
18 pole, keyboard extension connector on detachable terminal blocks
8 immediate setups for fast access and retrieval
Front panel keys, RS-232, RS-485, contact closure switches, external
keyboard
1.7 kg. (3.8 lbs.) Approx.
19 " x 2 " x 2U, (48 cm x 5 cm x 9 cm)
12 VDC, 400 mA.
3
VS-3000
Advertisement
Table of Contents
