Troubleshooting; Please Do Not Return This Product To The Store - Bissell SPOT CLEAN PRO User Manual

T
roubleshooting
Reduced Spray or No Spray
Possible causes
1. Formula & water tank may be empty
2. Formula & water tank may not be seated completely
3. Pump may have lost prime
Loss of suction power
Possible causes
1. Tanks may not be seated properly
2. Dirty tank has picked up maximum amount of
dirty water and has reached full line
3. Formula & water tank is empty
4. Suction Gate is open.
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
w w w . b i s s e l l . c o m
Remedies
1. Refill tank
2. Turn power OFF. Remove and reseat tank
3. Hold end of hose below water level in tank to prime
Remedies
1. Pick up both tanks and reseat them so it they fit snugly on
the unit
2. Empty dirty tank
3. Check fluid levels in formula & water tank
4. Check to make sure the suction gate is closed. Follow
"Cleaning Suction Gate" instructions on page 8.
8 0 0 . 2 3 7 . 7 6 9 1
9