Cleaning With Tools - Bissell SPOT CLEAN PRO User Manual

O
perations

Cleaning with Tools

ImPORTANT! If using to clean upholstery,
check upholstery tags. Check manufac-
turer's tag before cleaning. "W" or "WS"
on the tag means you can use your Spot
Clean Pro if the tag is coded with an "X"
or an "S"(with a diagonal stripe through
it), or says "Dry Clean Only", do not pro-
ceed with any deep cleaning machine.
Do not use on velvet or silk. If manufac-
turer's tag is missing or not coded, check
with your furniture dealer.")
1. hold the tool approximately 1" above the
soiled surface. Press the spray
trigger to apply the cleaning solution
to the soiled area.
Note: Hold end of hose below the tank
water level to help prime the portable
spot cleaner.
2. using the brush on the tool, gently scrub
the area to be cleaned.
3. apply downward pressure on the tool and
pull it toward you. the suction will remove the
dirt and cleaning solution. continue until no
more dirt can be removed.
Cleaning with
Deep Reach™ Tool
1. set tool on soiled surfaces and press the
trigger to spray solution onto the soiled
area to be cleaned.
2. slowly move the tool back and forth
over the soiled surface, keeping the tool
in contact with the carpet.
Release trigger and move tool slowly over
the soiled area to suction up
water and dirt.
4. continue to clean the area, working
in small sections, until no more dirt
can be removed.
6
w w w . b i s s e l l . c o m
Manufacturer's tag
Check for colorfastness in an
inconspicuous place. If possible,
check upholstery stuffing. Colored
stuffing may bleed through fabric
1.
3.
8 0 0 . 2 3 7 . 7 6 9 1