Monitor Function; Aquaquake Water Draining Function - Icom IC-M33 Instruction Manual

Vhf marine transceiver

Hide thumbs Also See for IC-M33:

Table of Contents

■ Monitor function

The monitor function opens the squelch. See p. 5 for details

of the monitor key action.

➥ The monitor function activates while pushing and holding

[MONI] (SQL).

• "

" blinks and audio is emitted.

Blinks while the monitor function is used.

Push and hold

The transceiver uses a new technology to clear water away

from the speaker grill: AquaQuake. AquaQuake helps drain

water away from the speaker housing (water that might

otherwise muffle the sound coming from the speaker). The

transceiver emits a vibrating beep when this function is

being used.

➥ Push and hold both [SCAN] and [H/L].

• A low beep tone sounds for 9 sec. to drain water, regardless of

volume level setting.

• The transceiver does not perform key operations while the

AquaQuake function is activated. The AquaQuake function can not

be activated when an optional speaker-microphone is connected.

BASIC OPERATION

Table of Contents