Table of Contents
Advertisement
Page 6 / TEMPO SELECTION (TEMPO)
This function describes how the PerformancePad Pro will use tempo data when playing back
Patterns.
If you choose GLOBAL, the PerformancePad Pro will
use a global tempo setting and will ignore any tempo
data associated with a Pattern.
If you choose PERPAT, the PerformancePad Pro will
use the tempo data stored with each Pattern.
example, if Pattern 01's tempo is set to 90 and Pattern
02's tempo is set to 120, the PerformancePad Pro will
increase the tempo when switching from Pattern 01 to
Pattern 02.
PAGE 7 / MANUAL DRUMSET OVERRIDE (SET MODE)
Each Pattern has an associated, assigned Drum Set. However, you can tell the PerformancePad
Pro to ignore these stored assignments, and retain the currently selected Drum Set regardless of
whether or not you change Patterns. This is useful if you want to hear how a Pattern would sound
with a different Drum Set (just set one up manually) as opposed to the one stored with the
Pattern.
Use the INC/DEC buttons or the VALUE dial to select
PATT (each Pattern uses its assigned Drum Set) or
MANUAL (the PerformancePad Pro will retain the
currently selected drum assignments regardless of
which Pattern is chosen).
Note: If changing Patterns doesn't call up
different Drum Sets, this parameter is
probably set to MANUAL instead of PATT.
Page 8 / LEDs (LEDS OFF)
On this page you can specify whether the LEDs on the
PerformancePad Pro will be lit or turned off.
Use the INC / DEC buttons or the VALUE dial and select
OFF to turn off the LEDs.
Select ON to turn on the LEDs.
Page 9 / BACKLIGHT BRIGHTNESS (BACKLITE)
On this page, you can adjust the brightness of the
display.
Use the INC / DEC buttons or the VALUE dial to adjust
the brightness setting (OFF, 1-9 or FULL for maximum
brightness).
For
40
Hide quick links:
Advertisement
Table of Contents
