Setting Song Tempo; Inserting A Tempo Change In A Song; Controlling Playback Position - Alesis Performance Pad Pro Reference Manual

SETTING SONG TEMPO

There are two ways to set tempo:
Method 1
1. Press STOP if the Song is playing.
2. Press the TAP TEMPO button several times at the desired tempo. The LD32 will
average the time between taps and derive a tempo.
Method 2
1. Alternatively, you can press and hold the TAP TEMPO button and use the INC / DEC
buttons or VALUE dial to select a new tempo.

INSERTING A TEMPO CHANGE IN A SONG

This option allows you to insert a tempo change at a selected Song step.
1. Press STOP if the song is playing.
2. Press the STEP EDIT button to enter Song
Step Edit mode.
3. Press and hold TAP TEMPO and press
PAGE UP to enter the Tempo Event Edit
Mode:
4. A tempo change can be inserted at any beat
of the Song Step.
TEMPO, use the PAGE buttons to select the
beat within the step.
5. While holding TAP TEMPO use the INC /
DEC buttons, number keypad or the VALUE
dial to set the tempo.
6. Release the TAP TEMPO button to return to
the previous page.
Note: If you would like to erase an existing Tempo Change event, navigate to the beat
where the event occurs while holding TAP TEMPO and press ERASE.

CONTROLLING PLAYBACK POSITION

If you press STOP while a song is playing, the next time you press PLAY the Song will start
from the beginning.
If you press PLAY while a song is playing, the song will pause. Press PLAY again to
resume playback.
Press PAGE UP while a song is playing to advance playback to the next Song step.
Press PAGE DOWN while a song is playing to restart playback from the current Song step.
While holding TAP
36