Husqvarna CTH-180 (V) Operator's Manual page 18

Table of Contents

Advertisement

Fig. 26
FUSE EXCHANGE
The fuse box is placed under the dash.
Proceed as follows:
1. Lift the hood up.
2. Pick out the fuse and replace it by another one
of the same value (15A).
If it is still impossible to start the engine, call
your service dealer.
WHEEL EXCHANGE (FIG. 27)
Fig. 27
Proceed as follows:
1. Switch off ignition.
2. Lift up the tractor and place it on stands.
3. Remove plastic cover.
4. Dismount the retaining ring, the flat washer, and
remove the wheel. Note: For a rear wheel,
watch the key and the key groove.
16
– English
MAINTENANCE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cth-180 (i)

Table of Contents