Transport Position - Husqvarna 325HE3 X-series Operator's Manual

Transport position

(325HE4)
Once the work has been completed fold the cutting unit
back against the shaft to simplify transport and storage of
the hedge trimmer.
1 Turn off the engine.
2 Fit the transport guard to the cutting attachment.
3 Loosen the knob on the shaft (clockwise).
4 Grip the handle on the cutting unit and angle the
cutting unit upwards. At an angle of 90 degrees there
is a stop position. To pass the stop position, pull out
the lock button.
5 Fold down the cutting unit against the shaft.
6 Turn the knob (anti-clockwise).
CAUTION! When the stop position has been passed the
blades are blocked, do not try to cut with the cutting unit
in this position.
WORKING TECHNIQUES
–
English 17