Advertisement
Advertisement
Table of Contents
Related Manuals for CEN-TECH 60431
Summary of Contents for CEN-TECH 60431
- Page 2 Underwriters Laboratories, Inc. Read the manual before Volts Alternating Current set-up and/or use. Amperes WARNING marking concerning Risk of Fire. Cold Cranking Amps Follow connection procedure. Reserve Capacity Ampere-hours Page 2 For technical questions, please call 1-888-866-5797. Item 60431...
-
Page 3: Important Safety Instructions
6. Do not operate charger with damaged cord or plug a ring or the like to metal, causing a severe burn. – replace the cord or plug immediately. Item 60431 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Dc Connection Precautions
15(e), 15(f), and 16(b) through 16(d). – then connect NEGATIVE (BLACK) charger clip to free end of cable. e. Do not face battery when making final connection. Page 4 For technical questions, please call 1-888-866-5797. Item 60431... - Page 5 If unreadable or missing, contact pacemaker interference or pacemaker failure. Harbor Freight Tools for a replacement. In addition, people with pacemakers should: • Avoid operating alone. 19. This product is not a toy.
-
Page 6: Specifications
6' 7", 18 AWG Battery Cables Red = Positive Black = Negative 3125044 Power Cord Features Charge Meter Self-resetting circuit breaker *Amperage is only present while connected to a battery. Page 6 For technical questions, please call 1-888-866-5797. Item 60431... -
Page 7: Controls
Sometimes conditions such as a cold battery, a sulfated battery, or a deeply discharged lead calcium battery may cause Charge Meter to read near a full charge when charging process is only beginning. Item 60431 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Preparing To Charge
WARNING! TO pREVENT SERIOUS INJURy, FIRE, AND pROpERTy DAMAGE: Monitor charging during use. This charger is not automatic and can overcharge and damage a battery if allowed to operate for extended periods of time. Page 8 For technical questions, please call 1-888-866-5797. Item 60431... -
Page 9: Charging Battery Inside/Outside Vehicle
4. Position yourself and free end of cable as far away indoors out of children’s reach. from battery as possible – then connect NEGATIVE (BLACK) charger clip to free end of cable. Item 60431 For technical questions, please call 1-888-866-5797. Page 9... - Page 10 • damaged electrical wiring or cable insulation, and DO NOT OpEN cHARGER HOUSING, • any other condition that may NO USER-SERVIcEABLE pARTS INSIDE. affect its safe operation. Page 10 For technical questions, please call 1-888-866-5797. Item 60431...
-
Page 11: Troubleshooting
Disconnect power supply before service. Record product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Internal parts are not user-serviceable and are not available. Item 60431 For technical questions, please call 1-888-866-5797. Page 11... - Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 60431 and is the answer not in the manual?
Questions and answers
Is it okay to leave charger 60431 on battery for extended periods on Trickle charge 2amp
No, it is not safe to leave the CEN-TECH 60431 charger on trickle charge for extended periods. The charger is not automatic and can overcharge and damage a battery if left operating too long.
This answer is automatically generated
Can I use the trickle charge setting 2amp while my truck sits in sub zero weather? for a day or two?
The CEN-TECH 60431 charger has a 2-amp setting designed for motorcycles, snowmobiles, and small engines. Trucks, especially in sub-zero weather, typically require a higher charging rate. Using the 2-amp setting for a day or two may not provide sufficient charging power for a truck battery. Additionally, this charger is not automatic and can overcharge the battery if left running too long. It is recommended to use the appropriate amperage setting and monitor the charging process to prevent battery damage.
This answer is automatically generated