Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CEN-TECH 60581
Summary of Contents for CEN-TECH 60581
- Page 2 Underwriters Laboratories, Inc. Read the manual before Volts Alternating Current set-up and/or use. Amperes WARNING marking concerning Risk of Fire. Cold Cranking Amps Follow connection procedure. Reserve Capacity Ampere-hours Page 2 For technical questions, please call 1-800-444-3353. Item 60581...
-
Page 3: Important Safety Instructions
6. Do not operate charger with damaged cord or plug a ring or the like to metal, causing a severe burn. – replace the cord or plug immediately. Item 60581 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: Dc Connection Precautions
Position yourself and free end of cable as far away from battery as possible – then connect NEGATIVE (BLACK) charger clip to free end of cable. e. Do not face battery when making final connection. Page 4 For technical questions, please call 1-800-444-3353. Item 60581... - Page 5 28. People with pacemakers should consult their If unreadable or missing, contact physician(s) before use. Electromagnetic fields in Harbor Freight Tools for a replacement. close proximity to heart pacemaker could cause 19. This product is not a toy. pacemaker interference or pacemaker failure.
- Page 6 Use this to set the battery type: • Set to Regular for flooded and maintenance-free batteries. • Set to AGM for Absorbed Glass Mat batteries. WARNING! TO pREVENT EXpLOSION: DO NOT USE WITH GEL BATTERIES. Page 6 For technical questions, please call 1-800-444-3353. Item 60581...
-
Page 7: Charger Location
4. Do not operate charger in a closed-in area being charged; gases from battery will or restrict ventilation in any way. corrode and damage charger. 5. Do not set a battery on top of charger. Item 60581 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Charging Battery Installed In Vehicle
12. After use clean, then store the charger indoors out of children’s reach. Page 8 For technical questions, please call 1-800-444-3353. Item 60581... - Page 9 Immediately disconnect the cables and connect as far away from battery as practical. them properly to prevent damage to the battery. 11. After use clean, then store the charger indoors out of children’s reach. Item 60581 For technical questions, please call 1-800-444-3353. Page 9...
-
Page 10: Engine Starting
10. After the engine starts, unplug the power cord from outlet before disconnecting the DC cable clamps. Page 10 For technical questions, please call 1-800-444-3353. Item 60581... -
Page 11: Troubleshooting
Record product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Internal parts are not user-serviceable. Replacement parts are not available. Item 60581 For technical questions, please call 1-800-444-3353. Page 11... - Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 60581 and is the answer not in the manual?
Questions and answers
my charger will not hum or no lights when PLUGGED IN
Your CEN-TECH 60581 charger may not be humming or showing lights due to the following possible reasons:
1. Cord not connected – Ensure the power cord is properly plugged into an outlet.
2. No power at outlet – Check if the outlet has power by testing it with another device.
3. Clamps not securely connected to battery terminals – Ensure the clamps are firmly attached to the battery terminals.
Check these factors to determine the issue.
This answer is automatically generated
My charger is charging. My question is about the indicator light that turns Green when there's a complete. That light is flashing red and green.
is there a fuse? how do I change it?
Yes, the CEN-TECH 60581 has a safety fuse. It is described as a round disc attached to the casing. If defective, it can prevent the charger from outputting voltage. The fuse is a common type available at auto parts stores, but it may be difficult to change because it is riveted into the unit.
This answer is automatically generated
Where do I get parts.. need new anmeter
Replacement parts for the CEN-TECH 60581 are not available.
This answer is automatically generated