Advertisement
Table of Contents
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
REV 14h
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Table of Contents
Related Manuals for CEN-TECH 60653
Summary of Contents for CEN-TECH 60653
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 Underwriters Laboratories, Inc. Read the manual before Volts Alternating Current set-up and/or use. Amperes WARNING marking concerning Risk of Fire. Cold Cranking Amps Follow connection procedure. Reserve Capacity Ampere-hours Page 2 For technical questions, please call 1-888-866-5797. Item 60653...
-
Page 3: Important Safety Instructions
6. Do not operate charger with damaged cord or plug a ring or the like to metal, causing a severe burn. – replace the cord or plug immediately. Item 60653 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Dc Connection Precautions
Position yourself and free end of cable as far away from battery as possible – then connect NEGATIVE (BLACK) charger clip to free end of cable. e. Do not face battery when making final connection. Page 4 For technical questions, please call 1-888-866-5797. Item 60653... - Page 5 – Risk of Fire or Electric Shock. accordance with all local codes and ordinances. Connect battery charger directly to grounding receptacle (three-prong). An adapter should not be used with battery charger. Item 60653 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Specifications
• Set to AGM for Absorbed Glass Mat batteries. Charge current to the battery is minimal WARNING! TO pREVENT EXpLOSION: and the green LED is on. DO NOT USE WITH GEL BATTERIES. Page 6 For technical questions, please call 1-888-866-5797. Item 60653... -
Page 7: Charger Location
4. Do not operate charger in a closed-in area being charged; gases from battery will or restrict ventilation in any way. corrode and damage charger. 5. Do not set a battery on top of charger. Item 60653 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Charging Battery Installed In Vehicle
Do not connect clip to carburetor, fuel lines, or sheet-metal body parts. Connect to a heavy gauge metal part of the frame or engine block. Page 8 For technical questions, please call 1-888-866-5797. Item 60653... - Page 9 Immediately disconnect the cables and connect as far away from battery as practical. them properly to prevent damage to the battery. 11. After use clean, then store the charger indoors out of children’s reach. Item 60653 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Engine Starting
10. After the engine starts, unplug the power cord from outlet before disconnecting the DC cable clamps. Page 10 For technical questions, please call 1-888-866-5797. Item 60653... -
Page 11: Troubleshooting
Record product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Internal parts are not user-serviceable. Replacement parts are not available. Item 60653 For technical questions, please call 1-888-866-5797. Page 11... - Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.