Power Control And Light Locations - HP Power Management User Manual

1

Power control and light locations

The following illustration and table identify and describe the power control and light locations.
NOTE: Your computer may look slightly different from the illustration in this chapter.
Component
(1) Power button
(2) Power lights* (2)
(3) fn+f5
Description
●
When the computer is off, press the button to turn on the
computer.
●
When the computer is on, press the button to initiate
hibernation.
●
When the computer is in standby, press the button briefly to
exit standby.
● When the computer is in hibernation, press the button briefly
to exit hibernation.
If the computer has stopped responding and Microsoft® Windows®
shutdown procedures cannot be used, press and hold the power
button for at least 5 seconds to turn off the computer.
On: The computer is on.
Blinking: The computer is in standby.
Off: The computer is off or in hibernation.
Initiates standby.
1