Conserving Battery Power; Conserving Power As You Work; Selecting Power Conservation Settings - HP Power Management User Manual

Conserving battery power

Using the battery conservation procedures and settings described in this section extends the time that
a battery can run the computer from a single charge.

Conserving power as you work

●
Turn off wireless and local area network (LAN) connections and exit modem applications when you
are not using them.
●
Disconnect external devices that you are not using that are not plugged into an external power
source.
●
Stop, disable, or remove any external media cards that you are not using.
●
Disable or remove an inserted digital card.
●
Use the
●
Use optional powered speakers instead of the internal speakers, or adjust system volume as you
need it.
●
Press fn+f4
●
If you leave your work, initiate standby or hibernation, or shut down the computer.

Selecting power conservation settings

●
Select a short wait for the screen saver, and select a screen saver with minimal graphics and
motion.
To access screen saver settings:
Select Start > Control Panel > Appearance and Themes > Choose a screen saver.
●
Select a Power Scheme with low power-use settings.
To select a Power Scheme:
Select Start > Control Panel > Appearance and Themes > Choose a screen saver > Power
button.
26 Chapter 7 Batteries
fn+f8 and fn+f7 hotkeys to adjust screen brightness as you need it.
to switch the screen image from the computer display to an external display device.