KVH Industries 5616 Owner's Manual page 4

RF2
(#1)
Power
Data
RF Cable
2.4.1 Connecting the Antenna Data Cable
to the IRD
The data cable now enters the baseplate through the second liquid-tight
fitting (cable port #3). Interior baseplate wiring is unchanged.
TracVision SA Data Cable Wiring Process
1. Feed the cable up to the roof and through the
second liquid-tight fitting (#3) as pictured in
Figure 2-14.
54-0149 Addendum to Rev. D
Power Data RF1
(#2) (#3) (#4)
A Guide to TracVision SA – ADDENDUM
Figure 2-14
Cable Port Assignments
(Exterior of Baseplate)
Figure 2-15
Interior Baseplate Wiring
3