Changing The Default Satellite; Monitoring The Current Status Of The Antenna - Raymarine 45 STV User Manual

26

Changing the default satellite

TRACKING A: ASTRA2
B: HOTBIRD SETUP
Your ACU is programmed with two default satellites. To change the default
satellite, press the left hand soft key. The default satellite changes and is
automatically tracked by the antenna.

Monitoring the current status of the antenna

SEARCHING A: ASTRA2
B: HOTBIRD SETUP
TRACKING A: ASTRA2
B: HOTBIRD SETUP
ANTENNA IS UNWRAPPING
B: HOTBIRD SETUP
TRACKING B: HOTBIRD
A: ASTRA 2 SETUP
1. Antenna is searching for satellite A.
2. Antenna is tracking satellite A.
3. Antenna is unwrapping the cable.
TRACKING A: ASTRA2
B: HOTBIRD SETUP
4. Antenna is again tracking satellite
AZ:###.# EL:###.#
5. Antenna position detail and signal
SIGNAL:### SETUP
*
126.75E 37.20N
6. The NMEA GPS information is
7. The skew angle is displayed.
--
SKEW : 28.3 > 400
-1 +1
Raymarine Satellite TV Systems
A. Press to display position detail.
strength is displayed.
Press center soft key to display NMEA
GPS page.
displayed.
Press center soft key to return to
antenna status display.(Standard
models)
Press center soft key to display skew
angle page.(Premium models only).
Press center soft key to return to
antenna status display ( Premium
models only).