Antenna diagnosis
SETUP MODE?
YES
NO
SET SAT PAIR?
PREV
YES
NEXT
ANT DIAGNOSIS?
PREV
YES
NEXT
CODE101 TESTING
EXIT
1. Press YES to enter set up mode.
2. Press NEXT 8 times to go to Antenna
Diagnosis menu.
3. Press YES to enter diagnosis mode.
4. Code 101 is being tested.
Press EXIT to return to main set up
menu.
5. Code 101 has been tested and passed.
CODE101 PASSED
EXIT
Code
Test
Code 101
Communication between antenna and ACU is being tested.
If failed, check the power and data cable connections.
Code 102
AZ CW (clockwise)) limit switch is tested.
If failed check the limit switch, motor and belt for azimuth axis.
Code 103
AZ CCW (counter clockwise) limit switch is tested.
If failed check the limit switch, motor and belt for azimuth axis.
Code 104
EL axis is tested.
If failed check the limit switch, motor and belt for elevation axis.
Code 105
Sub-reflector is tested.
If failed, check sub-reflector.
Code 106
LNB tested.
If failed, check the LNB and control board.
Press Exit to return to main set up
menu.
47