Installing The Acu - Raymarine 45 STV User Manual

Installing the ACU

The ACU should be installed below decks, in a position that is:
• dry.
• well ventilated.
• easily accessible.
• near your main TV viewing area.
The ACU should be installed using the two fixing brackets supplied. These
brackets can be placed on the sides of the unit to provide a top or bottom
fix.
To install the ACU:
1. Select the installation site, ensuring that the proposed site meets the
criteria described above.
2. Using the screws supplied fix the mounting brackets to the sides of the
ACU.
3. Place the ACU in the position where it is going to be installed.
4. Connect the cables to the rear of the ACU.
5. Using a pencil, mark the 4 hole positions (2 each side) for securing the
mounting brackets.
6. Using a suitable drill bit, drill the 4 holes in the required position.
7. It is good practice to countersink the mounting holes to avoid damage
to the mounting surface.
8. Using suitable screws, secure the ACU into position.
13