Samsung DE40C User Manual page 154

7
System
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting to
Anynet+ device..." appears on
the screen.
The connected device is not
displayed.
Possible Solution
Check if the device is an Anynet+ device. The Anynet+ system

supports Anynet+ devices only.
Check if the Anynet+ device power cord is properly connected.

Check the Anynet+ device's Video/Audio/HDMI cable

connections.
Check whether Anynet+ (HDMI-CEC)

setup menu.
Check whether the remote control is Anynet+ compatible.

If you have removed and then reconnected the HDMI cable,

please make sure to search devices again or turn your product off
and on again.
Check if the Anynet+ function of the Anynet device is set on.

Check if the Anynet+ device is properly connected to the product

and check if the Anynet+ (HDMI-CEC)
Anynet+ Setup menu.
Press the TOOLS button to display the Anynet+ menu and select

a menu you want.
Select View PC in the Anynet+ menu.

Press the SOURCE button on the product remote control and

select a non- Anynet+ device.
You cannot use the remote control when you are configuring

Anynet+ or switching to a view mode.
Use the remote control after the product has completed Anynet+

configuration or has finished switching to Anynet+.
Check whether or not the device supports Anynet+ functions.

Check whether or not the HDMI cable is properly connected.

Check whether Anynet+ (HDMI-CEC)

setup menu.
Search Anynet+ devices again.

Anynet+ requires an HDMI connection. Make sure the device is

connected to your product with an HDMI cable.
Some HDMI cables may not support Anynet+ functions.

If the connection is terminated because there has been a power

failure or the HDMI cable has been disconnected, please repeat
the device scan.
is set to On in the Anynet+
is set to On in the
is set to On in the Anynet+
154
7 System