Table of Contents
Advertisement
If your application is not here, you will need to check with the application
vendor to determine which ports need to be configured. You can
manually input this port information into the Router.To do this:
1 Specify the trigger port (the one used by the application when it is
initialized) in the Trigger Port column, and specify whether the trigger is
TCP or UDP.
2 Specify the Public Ports used by the application, that will need to be
opened up in the firewall for the application to work properly. Also
specify whether these ports are TCP or UDP.
3 You can temporarily enable or disable each entry in the table by checking
or unchecking the Enabled checkbox.
4 Press Apply Changes.
Virtual Servers
Figure 38 Virtual Servers Screen
This function will allow you to route external (Internet) calls for services
such as a web server (port 80), FTP server (Port 21), or other applications
through your Router to your internal network. Since your internal
Firewall
53
Advertisement
Table of Contents
