Multiple Protocol Over Atm - 3Com 3CRADSL72 User Manual

Multiple Protocol
over ATM
1 Enter the IP address, Subnet Mask and Default Gateway information
2 Enter the VPI and VCI parameters provided to you by your ISP in the VPI
3 Select the encapsulation type (LLC or VC MUX) in the Encapsulation Type
4 Click Apply Changes.
Figure 27 Mutli Protocol over ATM Screen
provided by your ISP into the IP address, Subnet Mask and Default Route
fields.
and VCI fields.
field. This information will have been provided to you by your ISP.
Internet WAN 43