Pppoe - 3Com 3CRADSL72 User Manual

40 C 5: R
HAPTER OUTER

PPPoE

C
ONFIGURATION
Figure 24 PPPoE Settings Screen
1 Enter the User Name assigned to you by your ISP in the User Name field.
2 Enter the Password assigned to you by your ISP in the Password field.
Re-enter your password in the Retype Password field.
3 If your ISP assigns your IP address manually, select No in the IP address
assigned by ISP field, and proceed to step 4. If you ISP has assigned you a
fixed or static IP addres, select Yes in the IP assigned by ISP field.
Then enter the IP address and Subnet Mask information provided by your
ISP into the IP address and Subnet Mask fields.
4 Enter the VPI and VCI parameters provided to you by your ISP in the VPI
and VCI fields.
5 Select the encapsulation type (LLC or VC MUX) in the Encapsulation Type
field. This information will have been provided to you by your ISP.
6 If you want your Router to connect to the Internet every time a PC needs
to access it, check the Dial on Demand checkbox. If this box is not
checked, then you will have to manually connect and disconnect using
the buttons on the Home Screen (see
7 If you want your Router to automatically disconnect from the Internet
automatically after a period of inactivity, specify a time in the Idle Time
(Minutes) field.
page 35).