128-Bit Wep - 3Com 3CRADSL72 User Manual

48 C 5: R
HAPTER OUTER

128-bit WEP

C
ONFIGURATION
numbers. The key must be between 8 and 63 characters long and can
include spaces and symbols.
Note that each client that connects to the network must use the same
key.
2 Press Apply Changes.
Figure 33 128-bit WEP Screen
WEP is the basic mechanism to transmit your data securely over the
wireless network. Matching encryption keys must be setup on your
Router and wireless client devices to use WEP.
1 You can either enter your WEP key as 13 pairs of hex digits (0-9, A-F), or
enter a memorable passphrase in the Passphrase box, and then press the
Generate button to generate the hex keys from the passphrase.
Note that the WEP keys on each device in the wireless network must be
identical.
Note also that in 128-bit WEP mode, only one WEP key (key 1) can be
specified.
2 Press Apply Changes.