Table of Contents
Advertisement
C. Firewall Setup
Select the Advanced Folder on the left side of the screen, and the Firewall
Setting file under that Folder. This screen (see Figure 24), allows you to
enable or disable specific options related to the firewall that the router
provides between the Internet and the users. These settings are specific to
the programs and functions that are being run at that site.
301 Fulling Mill Road, Suite G
Middletown, PA 17057
Innovations in Home Living.
(800) 321-2343
(
Page 21
Figure 23
©Copyright 2004 by OnQ Technologies,
Inc All Rights Reserved.
www.onqhome.com
)
4
router's DHCP option to "Disable" if you already have one DHCP server
on your network.
Number of DHCP Users
Enter the maximum number of PC that you want the DHCP server to
assign IP addresses to, with the absolute maximum being 248 (6-253).
Starting IP Address
Enter a numerical value for the DHCP server to start with when issuing
IP address.
Except IP Address
Enter an IP address that should not be automatically assigned (static for
example).
Lease Time
The number of days (24 is default) before an IP device asks if his IP
address is still valid.
Gateway
Select the default or enter the Gateway's IP address. This will also remove
it from the DHCP pool.
DNS
Enter DNS addresses if assigned by the ISP.
Domain Name
If the router is being used to host an Internet website, enter the domain
name of the site.
Manual
Enter any static IP addresses or MAC addresses that will not be part of the
DHCP pool.
301 Fulling Mill Road, Suite G
Middletown, PA 17057
Innovations in Home Living.
(800) 321-2343
(
Page 20
©Copyright 2004 by OnQ Technologies,
Inc All Rights Reserved.
www.onqhome.com
)
4
Advertisement
Table of Contents
