Location; Preparation - Haier HRF-300M Operating Manual

Location

The appliance should be placed on a flat and solid surface. If the refrigerator is
placed on a plinth, flat, strong and fire-resistant materials must be used. The front
black foot of the refrigerator can be adjusted clockwise or anti-clockwise to lift or
lower the refrigerator if it is placed on an uneven surface.
Adjustable Foot
Clockwise
The refrigerator should be placed in a
well-ventilated area, and a space of 10cm or
more should be allowed around the
refrigerator.
>10cm
>10cm
>10cm
Never place the refrigerator in an area with
an ambient temperature below zero.
Never operate the refrigerator outdoors or in
rain.
O
6
Anti-clockwise
The refrigerator shall be placed away
from heat sources or direct sunlight.
Never place the refrigerator near to a water
source. Clean and dry any water splashes
and stains with soft cloth.

Preparation

1
Unpacking
Remove all packing materials.
2
Check attached accessories and
materials.
Check if all accessories specified in the
Packing List are available. Contact the
local distributor if shortage is found.
3
Ensure that the refrigerator is properly
located.
(See section Location)
4
Clean the refrigerator before using.
(See section Cleaning)
5
Time lapse before power supply
Connect the refrigerator to power source at
least 30 minutes after the refrigerator is
sited and cleaned.
Caution: After unpacking, write down the model and manufacture
number of the refrigerator on the Warranty Certificate which will be
required if technical services are applied for.
7