Stainless Steel Corners; Winterizing - Jacuzzi J - LX Owner's Manual

Small scratches or nicks resulting in the lighter colored sub surface being
exposed can be made less obvious by using common furniture repair
markers. These are generally available in packs with several wood tones
from which a close match can be selected to the color of the scratched
part.
12.8

Stainless Steel Corners

To prolong the life of the stainless steel, handle it with care and clean it
regularly. Below are the care instructions.
1. A simply solution of warm water with a couple of drops of liquid soap
makes an excellent cleaner.
2. Dampen a soft cloth (such as a microfiber cloth) into the cleaning
solution.
3. Following the grain of the stainless steel, wipe and clean the steel.
4. Dry off the stainless steel using another clean, dry soft cloth.
Note: Never use abrasive cleaners, steel wool, scrubbing brushes, or
scrubbing pads on the stainless steel. Should scratches occur, products
are available at local home centers that can help fix them.
CAUTION: Never spray cabinet with a garden hose for any
reason since this action may induce an electrical short in the
spa's electrical equipment.
12.9

Winterizing

Your Jacuzzi spa is designed to automatically protect itself against
freezing when operating properly. During periods of severe freezing
temperatures, you should check periodically to be certain that the
electrical supply to the spa has not been interrupted. In extreme, bitter
cold weather less than -20°F (-29°C), choose the F3 "Standard" filtration/
heating mode to prevent freezing (page 30).
If you do not intend to use your spa, or if there is a prolonged power
outage during periods of severe freezing temperatures, it is important
that all water be removed from the spa and equipment to protect
against damage from freezing.
Expert winterization of your spa is highly recommended, contact your
authorized Jacuzzi dealer. In emergency situations, damage can be
minimized by taking the following steps:
CAUTION: TURN OFF POWER TO HOT TUB!
1. Turn off power to the spa.
2. Follow the directions on page 38 for draining the spa.
3. Turn the massage/diverter selector(s) into the middle combo position
to allow the water in the plumbing lines to drain, see page 29.
4. Turn the waterfall valve(s) to the open position to allow the water in
the plumbing lines to drain, see page 29.
LX Collection
41