Generac Power Systems 3000PSI Owner's Manual

Generac Power Systems 3000PSI Owner's Manual

High pressure washer

Advertisement

Quick Links

3000PSI
GENERAC
The Reliable Ones
High Pressure Washer
Owner's Manual

Advertisement

Table of Contents
loading

Summary of Contents for Generac Power Systems 3000PSI

  • Page 1 3000PSI GENERAC The Reliable Ones High Pressure Washer Owner’s Manual...
  • Page 3: Product Specifications

    PRODUCT SPECIFICATIONS Pressure Washer Specifications Engine specifications CUSTOMER RESPONSIBILITIES...
  • Page 4: Know Your Pressure Washer

    KNOW YOUR PRESSURE WASHER...
  • Page 5: Carton Contents

    S S S S E E M M B B L L PREPARING THE PRESSURE WASHER FOR USE REMOVE PRESSURE WASHER FROM CARTON CARTON CONTENTS Attach the Handle Figure 1 — Attach the handle to the base.
  • Page 6 S S S S E E M M B B L L Add Gasoline Add Engine Oil Figure 3 — Add gasoline to fuel tank. Figure 2 — Add oil to engine crankcase. Do not attempt to start engine without adding oil.
  • Page 7 S S S S E E M M B B L L Connect Hose and Water Supply to Pump Figure 5 — Connect high pressure hose to pump. Figure 4 — Connect high pressure hose to spray gun. Figure 6 — Connect garden hose to water inlet and turn ON water.
  • Page 8: Checklist Before Starting Engine

    S S S S E E M M B B L L USING THE NOZZLES CHECKLIST BEFORE STARTING ENGINE Figure 8 — Spray patterns of nozzles...
  • Page 9: Pressure Washer

    HOW TO USE YOUR PRESSURE WASHER Figure 9— Safety Latch. How to Start Your Engine How to Stop Your Pressure Washer...
  • Page 10 How to Use the Dual Lance and Applying Detergent Adjust Pressure Figure 10 — Pressure control knob.
  • Page 11: General Maintenance

    Pressure Washer Rinsing GENERAL MAINTENANCE RECOMMENDATIONS BEFORE EACH USE Automatic Cool Down System (Thermal Relief)
  • Page 12: Pressure Washer Maintenance

    PRESSURE WASHER MAINTENANCE Check and Clean Inlet Screen Cleaning Chemical Injecting Tube Check High Pressure Hose Check Chemical Injecting Tube Nozzle Maintenance Check Gun and Dual lance Purge Pump of Air and Contaminants...
  • Page 13: Service And Adjustments

    SERVICE AND ADJUSTMENTS Figure 11 — Removing and cleaning nozzle. PREPARING THE UNIT FOR STORAGE Figure 12 — Backflushing the nozzle. STORING THE ENGINE ENGINE MAINTENANCE...
  • Page 16 Problem Cause Correction...
  • Page 17 PROBLEM CAUSE CORRECTION...

Table of Contents