Advertisement
Bluetooth® Thumbpad for Smartphones, PDAs and Pocket PCs
• Insert the 2 AAA batteries beneath the battery cover of the
Bluetooth Thumbpad.
• Please follow the installation instructions carefully corresponding
to the correct mobile device platform you are using.
Status Indicator Light
Installing the Batteries
• Remove the battery cover from the back of the thumbpad by
pressing down on the "arrow" and sliding off the back cover.
• Insert the supplied batteries, making sure that the positive (+) and
negative (-) ends of each battery match the polarity indicators inside
the battery housing.
• Snap the battery cover back into position.
• Turn on the thumbpad by sliding on/off switch on the top of the
thumbpad to the "On" position.
WARNINGS: WHEN REPLACING THE BATTERIES, YOU MAY USE ALKALINE OR
OTHER HEAVY DUTY NiMH BATTERIES. NEVER USE AN ALKALINE WITH A NiMH
BATTERY IN A DEVICE. AVOID MIXING NEW AND USED BATTERIES IN A DEVICE
On / Off switch
Front
<LINK> button
battery slots
4
Back
battery cover
Advertisement
