Advertisement
Bluetooth® Thumbpad for Smartphones, PDAs and Pocket PCs
Palm OS 5
System requirements
• Palm OS device with built-in Bluetooth
• At least 50 KB of free memory on your Palm OS device.
• PC with Microsoft Windows 2000/XP operating system
• A synchronizing program on your computer, (ie. Palm™ Desktop
Software)
Installation
1. Connect your Palm OS through cable for synchronizing with the
computer.
2. Launch the software CD (supplied) or download the latest Bluetooth
thumbpad software from www.targus.com
NOTE: ENSURE THAT YOU DOWNLOAD/USE THE CORRECT DRIVER FOR YOUR
DEVICE. FAILURE TO DOWNLOAD/USE THE CORRECT DRIVER WILL RESULT IN
INSTALLATION FAILURES
3. Please make sure your PDA is connected to your PC then double
click the driver installer.
4. After the installation is done, the Bluetooth thumbpad driver is
copied to the HotSync Manager in your computer.
5. Make sure the cradle / cable is connected, and run the HotSync
software to synchronize and copy the driver to your Palm OS device.
6. After the Bluetooth thumbpad driver is installed successfully, you can
find this Bluetooth thumbpad icon shown on the Home list of the
Palm OS device. (as shown)
13
Advertisement
