Model: SCM1000SS Microwave Oven User's manual Please read these instructions carefully before installing and operating the oven. Record in the space below the SERIAL NO. found on the nameplate on your oven and retain this information for future reference. SERIAL NO. _______________________ Please save sales receipt for warranty.
Do not attempt to operate this oven with the door-open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces.
circuit breaker panel. When using electrical appliances, basic safety precautions should be followed, Do not use the cavity for storage including the following: purposes. Do not leave paper products, cooking utensils or food in the cavity WARNING - To reduce the risk of burns, when not in use.
Page 4
outdoors. Do not use this product near specifically designed water, for example, near a kitchen sink, microwave ovens. in a wet basement, near a swimming Do not operate any heating or cooking pool, or similar locations. appliance beneath this appliance. Do not operate this appliance if it has a This appliance should be serviced only damaged cord or a plug, if it is not...
Make sure that all the packing moisture, or high humidity are materials are removed from the generated, or near combustible inside of the oven. materials. Check the oven for any damage, For correct operation, the oven such as misaligned or bent door, must have sufficient airflow.
Power Supply Cord Neither Summit nor the dealer can accept any liability for damage to the A short power supply cord is oven or personal injury resulting from provided to reduce the risks resulting...
short-term heating at low temperatures. Not Recommended Do not use recycled paper, which may Glass jars and bottles — Regular glass contain metal and could ignite. is too thin to be used in a microwave. It Wax paper — Use as a cover to prevent can shatter and cause damage and spattering.
foods stand complete cooking, HIELDING especially foods such as cakes and Shield food with narrow strips whole vegetables. Roasts need this time aluminum foil to prevent overcooking. to complete cooking in the center without Areas that need shielding include poultry overcooking the outer areas.
Door Safety Lock System Oven Window Control Panel Digital display window Power level pad X2 pad Program pad Stop/Reset pad Start pad Number/Memory pads X2 indicating cooking in X2 feature. PROG indicating programming a cooking Numbers indicating the cooking stage Indicating power level used in cooking...
IME AND POWER LEVEL COOKING To set a cooking program. Select a cooking power level and then use the number pads to set cooking time before touching the START pad. The longest cooking time is 99 minutes 99 seconds. Touch POWER LEVEL Power Description Once Twice...
The user is free to reset the cooking program stored under each of the ten number keys anytime. In order to set a cooking program, which may contain up to 3 stages of consecutive cooking periods with different power levels, and to designate a number key for this program, see the example below: To set medium power cooking for 8 min.
Note: If you want the oven to start immediately after touching any of the number keys instead of after touching the START pad, press and hold down STOP/RESET for 5 sec until “P L” appears on the display; now you don’t need to press the START pad after selecting a cooking program by touching any of the number keys.
Turn off the oven and remove the may occur when the microwave power plug from the wall socket oven operated under high before cleaning. humidity conditions. In such case, it is normal. Keep the inside of the oven clean. The oven floor should be cleaned When food splatters or spilled regularly.
LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship.
Need help?
Do you have a question about the SCM1000SS and is the answer not in the manual?
Questions and answers