Remove the following:
6.
(1) One Phillips PM2.0×3.0 broad-head screw
(2) Two Phillips PM2.5×3.0 broad-head screws
(3) Two Hex HM5.0×9.0 standoffs
(4) One Phillips PM2.5×6.0 screw
Turn the computer right-side up, with the front toward you.
7.
Release the ZIF connector to which the TouchPad cable is connected and disconnect the TouchPad
8.
cable (1) from the system board.
Remove the following screws:
9.
(2) Two Phillips PM2.5×5.0 screws that secure the top cover to the computer
(3) One Phillips PM2.5×6.0 screw that secures the top cover trim to the computer
Remove the top cover trim (1). The top cover trim is available using spare part number
10.
431421-001.
Component replacement procedures
63