Speaker assembly
Description
Speaker assembly (includes cables)
Before removing the speaker assembly, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the switch cover (see
5.
Remove the speaker assembly:
Disconnect the speaker assembly cable (1) from the power button board.
1.
Remove the two Phillips PM2.5×2.0 broad-head screws (2) that secure the speaker assembly to the
2.
switch cover.
Remove the speaker assembly (3).
3.
Reverse this procedure to install the speaker assembly.
Battery on page
36).
Switch cover on page
49).
Component replacement procedures
Spare part number
431447-001
51