Removal And Replacement Procedures; Preliminary Replacement Requirements; Tools Required; Service Considerations - HP PAVILION DX6500 Maintenance And Service Manual

Removal and replacement
4
procedures

Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
Flat-bladed screwdriver
●
Hex 5.0-mm nut driver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
●

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.

Plastic parts

Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
28 Chapter 4 Removal and replacement procedures