Setting The A.processor; Setting The Mx Mode Of The External Audio Processor; Setting Bass Sound Control; Using The Pro Logic Ii Mode - Alpine INA-W900E Owner's Manual

01GB00INA-W900E.book Page 68 Monday, September 13, 2010 9:52 AM

Setting the A.PROCESSOR

1
Check that DEFEAT mode is OFF (page 57).
2
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
3
Touch [AUDIO SETUP].
The AUDIO SETUP screen appears.
4
Touch [ ] of A.PROCESSOR.
The A.PROCESSOR list screen appears.
5
Touch [ ] , [ ] or [
change its setting.
Setting items:
MEDIA XPANDER / BASS SOUND CONT. / DOLBY PLII/
REAR FILL / X-OVER / T.CORR / PHASE / G-EQ / P-EQ /
SPEAKER SELECT / MULTI CH SETUP / SPEAKER SETUP /
DVD LEVEL / PCM MODE
• Touching [ESC] will change to the main source screen.
• Touching [ ] to return to the previous screen.
Setting the MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to "AUTO" when the PXA-H700 is connected.
Setting item: MEDIA XPANDER
1
Select ON or OFF of MX by touching [ ] or [ ] of
MEDIA XPANDER.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
2
Touch [ ] after setting to ON.
The MEDIA XPANDER setup screen appears.
3
Touch [ ] or [ ] of the desired MX mode.
• Music source (such as radio broadcasts and CDs, excluding AM
radio) level can be set.
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
MX CMPM (OFF, CMPM MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
(DVD MUSIC)
This disc contains a large quantity of data such as music clip.
MX uses this data to reproduce the sound accurately.
MX AUX (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MUSIC, or MOVIE) that
corresponds to the media connected.
68
-EN
01GB05INA-W900E.fm
] etc., of the desired item to
• The contents of MX set here is reflected to PXA-H700 or PXA-H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD and MP3 can have its own MX
setting.
• There is no MX for AM radio.
• MX CMPM is applied for MP3/WMA/AAC and iPod.
• The MX setting can be performed only when a source is currently
selected.

Setting Bass Sound Control

Setting item: BASS SOUND CONT.
Setting Bass Compressor
You can adjust the sound of low frequencies as desired.
Touch [ ] or [ ] of BASS COMP. to select the desired
mode.
Bass sound is emphasised more as the mode is
sequentially switched as MODE 1
vivid low frequencies.
Select OFF when the setting is not necessary.
Setting Bass Focus
Using the previously specified delay number (time difference) allows
you to set a time difference between the front-rear/left-right speakers.
Namely, it enables a time correction based on your preference. With an
initial delay of 0.05 ms for each of the 0 to 400 steps, audible time
correction can be achieved.
Set the delay number in the front and rear, and on the
right and left of the desired speaker by touching the
respective [ ] or [ ] button.
• Any setting in Bass Focus is applied in time correction, too (page 69).

Using the Pro Logic II Mode

Pro Logic processing can be conducted on the music signals recorded
on two channels to achieve Dolby Pro Logic II surround sound. For
two-channel Dolby Digital and DTS signals, there is also a "REAR
FILL" function for outputting the signals of the front channel to the rear
channel.
Setting item: DOLBY PLII/REAR FILL
Touch [ ] or [ ] of DOLBY PLII/REAR to select the
desired mode.
PL II MOVIE: Suits the stereo TV shows and all programmes
encoded in Dolby Surround. It improves the
sound field directivity to near that of discrete
5.1-channel sound.
PL II MUSIC: Can be used for all stereo music recordings, and
provides a wide, deep sound field.
OFF: Turns DOLBY PL II function to OFF.
If PL II MUSIC is selected, the centre width can be adjusted with
following operations.
This function offers the optimum vocal position by adjusting the
centre channel position between the centre speaker and the L/R
speaker. (The adjustments established in "Adjusting the
acoustic image (BI-PHANTOM)" (page 71) are ineffective while
this function is activated.)
Touch [ ] or [ ] of CENTER WIDTH CONT. to adjust the
level.
The level can be adjusted between 0 to +7. When the
level increases, the centre channel position moves from
the centre speaker position to both sides.
Touch [OFF] of CENTER WIDTH CONT. to turn off the
centre width control.
ALPINE INA-W900E 68-16909Z25-A (EN)
2 3, offering you