Sony SRS-D101 Service Manual page 8

SRS-D101
Ver 1.1 2002.11
2-4. Schematic Diagra – ALL Section – • See page 4 for IC Block Diagrams.
AUS
AUS
8 8
AUS
AUS
AUS
AUS
Note on Schematic Diagram: • Voltages is dc with respect to ground under no-sig-
• All capacitors are in µF unless otherwise noted. pF:
nal (detuned) conditions.
µµF 50 WV or less are not indicated except for
• Voltages are taken with a VOM (Input impedance
electrolytics and tantalums. 10 MΩ).
• All resistors are in Ω and
1 / W or less unless other- Voltage variations may be noted due to normal pro-
4
wise specified. duction tolerances.
• C : panel designation.
• Signal path.
• A : B+ Line.
E
• B : B– Line.
• Abbreviation The components identified by
mark 0 or dotted line with mark
CND : Canadian model.
0 are critical for safety.
E92 : Chilean and Peruvian model.
Replace only with part number
SP : Singapore model.
specified.
AUS : Australian model.
: AUDIO signal
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.