Sony 4-140-464-21(2) Operating Instructions Manual
Sony 4-140-464-21(2) Operating Instructions Manual

Sony 4-140-464-21(2) Operating Instructions Manual

Sony active speaker system operating instructions

Advertisement

Quick Links

4-140-464-21(2)
Active
Speaker
System
Operating Instructions
SRS-DB500
©2009 Sony Corporation

Advertisement

Table of Contents
loading

Summary of Contents for Sony 4-140-464-21(2)

  • Page 1 4-140-464-21(2) Active Speaker System Operating Instructions SRS-DB500 ©2009 Sony Corporation...
  • Page 2 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
  • Page 3 Notice for customers: The following information is only applicable to equipment sold in countries applying EU Directives. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
  • Page 4: Table Of Contents

    Table of Contents Unpacking... 5 Guide to parts and controls... 6 Getting Started Hooking up the system ... 8 Positioning the speakers ... 11 Basic Operations Listening to the sound ... 12 Adjusting the sound... 13 Changing the display ... 14 Additional Information Troubleshooting...
  • Page 5: Unpacking

    Unpacking Check that you have the following items: • Subwoofer (1) • Satellite speakers (2) • Remote Commander (1) • Audio cord (1) • Operating Instructions (1)
  • Page 6: Guide To Parts And Controls

    Guide to parts and controls Subwoofer A JOG Turn to adjust the volume, bass and treble level. B Illuminator Lights up when the system is turned C MUTING indicator Lights up when the muting function is activated. D "/1 (on/standby) button (pages 9, 12, 15, 16) Press to turn the system on or off.
  • Page 7 Remote RM-AS31 A "/1 (on/standby) Press to turn the system on or off. B DISPLAY Press to change the illuminator pattern around JOG. C VOLUME +/–* Press to adjust the volume. * The VOLUME + button has a tactile dot. Use the tactile dot as a reference when operating the system.
  • Page 8: Getting Started

    Getting Started Hooking up the system Subwoofer – Rear panel 1 To satellite speaker (left) 2 To satellite speaker (right) – Front panel INPUT 2...
  • Page 9 A INPUT 1 L/R jacks Use an audio cord (supplied) to connect INPUT 1 jack to LINE OUT or headphones jack of portable audio device, computer, etc. INPUT 1 White To INPUT 1 jack B Satellite speakers Be sure to insert the connector straight into the terminals. SPEAKER C Power Connect the power cord to a wall outlet after you have make all connections.
  • Page 10: Using The Remote

    D INPUT 2 jack Use a connecting cord (not supplied) to connect INPUT 2 jack to LINE OUT or headphones jack of portable audio device, etc. To INPUT 2 jack Note When the system is connected to the monaural jack of the source device, the sound may not come through the right satellite speaker.
  • Page 11: Positioning The Speakers

    Positioning the speakers You can place your speakers as shown below. Portable audio device, computer, etc. Subwoofer Left satellite speaker Right satellite speaker...
  • Page 12: Basic Operations

    Basic Operations Listening to the sound Press "/1 to turn on the system. The "/1 indicator lights off when the system is turned on. Press INPUT repeatedly. Each press changes as follows: t INPUT 1 t INPUT 2 Notes • Select INPUT 1 to listen to device connected to INPUT 1 jack.
  • Page 13: Adjusting The Sound

    Adjusting the sound Adding a sound effect — BASS Press BASS to enter bass level setting mode. Turn JOG to adjust the bass effect. You can adjust from –8 dB to +8 dB in 2 dB step. Turn JOG clockwise to increase bass level.
  • Page 14: Changing The Display

    Changing the display Changing the illuminator You can select the illuminator as you want. Press DISPLAY on the remote repeatedly to select the illuminator you want when the system is turned on. Each time you press the button, the illuminator changes cyclically as follows: Deco light mode t Volume mode Power meter mode...
  • Page 15: Additional Information Troubleshooting

    If the "/1 indicator still flashes, or if the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. General There is no sound.
  • Page 16: Precautions

    Speakers There is no sound from the speaker system. • Make sure all the connections have been correctly made. • Make sure the satellite speaker and the connected device have been turned up properly. • Connect only the supplied speakers. •...
  • Page 17: Specifications

    On cleaning Do not use alcohol, benzene, or thinner to clean the cabinet. If you have any questions or problems concerning your speaker system, please consult your nearest Sony dealer. Specifications Speaker section Satellite speaker Speaker system Full range, magnetically shielded Speaker units 6.5 cm, cone type...
  • Page 18 General Dimensions (w/h/d) Approx. 94 × 196 × 135 mm × 7 × 5 (Satellite speaker) Approx. 221 × 403 × 411 mm × 15 × 16 (Subwoofer) Mass Approx. 0.7 kg (1 lb 9 oz) (Satellite speaker) Approx. 8.5 kg (18 lb 12 oz) (Subwoofer) Power requirements European, Oceanian, China,...
  • Page 20 Printed in Malaysia...

This manual is also suitable for:

Srs-db500

Table of Contents