Removing And Reinstalling The Main Parts - Sharp CD-C602 Service Manual

CD-C602,CP-C602

REMOVING AND REINSTALLING THE MAIN PARTS

CD MECHANISM SECTION
Perform steps 1, 2, 3, and 8 ~ 11 of the disassembly method
to remove the CD mechanism.
How to remove the turntable up/down/loading
motor (See Fig. 8-1)
1. Remove the screws (A1) x 2 pcs., to remove the turntable
up/down/loading motor.
How to remove the pickup (See Fig. 8-2)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2)
x 1 pc.
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4) x 1 pc.
3. Remove the pickup.
Note:
After disconnecting the optical pickup connector wrap the
front end of connector in conductive aluminum foil so as to
prevent damage to the optical pickup by static electricity.
Turntable Up/Down/
Loading Motor
Motor
PWB
(B1) x2
ø2.6 x6mm
(B2) x1
(B4) x1
– 8 –
(A1) x2
ø2.6 x5mm
Figure 8-1
(B3) x1
CD Mechanism
Figure 8-2
Pickup